Standard 10 ft Canopy Tents (Full Color, Aluminum Frame)
Don't see what you need here for your product? Need different paper stock options or sizes not shown? Don't worry. That means you need a custom job! Just fill out this form and we'll get you sorted out right away.
Canopy tents are an excellent way to provide shade for outdoor events. This canopy is a standard 10 ft. x 10 ft. size frame with five different heights ranging from 10.5 ft. to 11.25 ft. tall. Telescopic legs snap into place. Each hex leg on this aluminum frame is 40 mm thick.
Wind Speed Rating:
(1) Aluminum Frame
(1) Black nylon carry bag
Warranty: Lifetime on frame
Full walls (118.75″ w x 88 ” h) – requires 1 rail per full wall. These can be single-sided or double-sided. They are fastened to the top of the canopy tent via velcro and they are secured at the bottom with a horizontal pole which travels the width of the full wall (inside a pole pocket) that attach to the legs of the canopy frame. Full walls can be assembled onto any side of the canopy.
Half walls (112”W x 47.5”H) – requires 2 rails per side rail (top and bottom) These can be single-sided or double-sided. They are fastened at the top and at the bottom with a horizontal pole which travels the width of the sidewall (inside pole pockets) and attach to the legs of the canopy frame. Half walls can be assembled onto any side of the canopy.
Cases/bags – Our 10ft Canopy comes standard with a black nylon bag which has a strap for carrying over the shoulder. Upgrade to our Canopy bag with wheels that allows easier transport where longer transport is required by foot, or upgrade to our Hard Case with wheels that gives a greater amount of protection with a solid, molded plastic construction.
Sandbag Cover – This black nylon sand bag cover is used to protect your sand bag as well as to easily attach your sand bag to one leg of the Canopy frame for added weight against wind. Included is the cover and hook. Do not fill this cover with sand. To use, slip hook through the grommet located on the handle of the cover and then close hook around leg of canopy. With the cover already on the ground, open velcro opening and place sand bag inside the cover. Close velcro opening, and you’re done.